| Nlim (oil) | 2,600 rpm |
| Bore Diameter (mm) | 155,000 |
| Outer Diameter (mm) | 163,000 |
| Min operating temperature, Tmin | -20 °C |
| Nlim (grease) | 1,700 rpm |
| Characteristic cage frequency, FTF | 0.49 Hz |
| Characteristic rolling element frequency, BSF | 39.72 Hz |
| Characteristic outer ring frequency, BPF0 | 33.14 Hz |
| Characteristic inner ring frequency, BPFI | 34.86 Hz |
| b | 26 mm |
| Fw | 155,000 mm |
| C0r | 224 kN |
| Dw | 4 mm |
| Ew | 163,000 mm |
| Bc | 25,700 mm |
| Mass | 0.27 kg |
| Max operating temperature, Tmax | 120 °C |
| Bearing number | K155X163X26 |
| Cr | 73.5 kN |
| Lw | 19.8 mm |
| 6HR2042TM[F(AP-C),F(AP-CF),F(AP-HC)]+[112-1000/1]LM THK Separated Linear Guide Side Rails Set Model HR | Cr:4910; da(min):468; e:0.29; Calculation factor (Y1):2,35; Calculation factor (Y0):2,3; Size (mm):440x650x212; Basic dynamic load rating (C):3910 kN; ra(max):5; Da max.:622 mm; (Oil) Lubrication Speed:490 r/min; Outer Diameter (mm):650; Cu:475; C0r:8320; Y0:2.30; D:650 mm; d:440 mm; ra max.:5 mm; d |
| 6HR2042TM+[112-1000/1]L[H,P,SP,UP]M THK Separated Linear Guide Side Rails Set Model HR | ra max.:2 mm; F:70.5 mm; Fatigue load limit Pu:18.6 kN; Basic dynamic load rating - C:156 kN; Mass bearing:1.74 kg; da - min.:65 mm; Basic dynamic load rating C:156 kN; Outer Diameter (mm):55; da min.:65 mm; r1,2 min.:2 mm; ra - max.:2 mm; Da - max.:109.2 mm; Reference speed:6000 r/min; d1 ≈:7 |
| 6HR2042TM+[112-1000/1]LM THK Separated Linear Guide Side Rails Set Model HR | Outer Diameter (mm):400; Bearing number:NN 3052 K/SPW33; Weight:44,0 Kg; Basic static load rating (C0):1891,4 kN; Size (mm):260x400x104; D:400 mm; d:260 mm; Basic dynamic load rating (C):999,6 kN; C:104 mm; Bore Diameter (mm):260; Width (mm):104; (Grease) Lubrication Speed:1843 r/min; B:104 mm; |
| 6HR2555[F(AP-C),F(AP-CF),F(AP-HC)]+[122-2600/1]L THK Separated Linear Guide Side Rails Set Model HR | Shaft Size:120 mm; Dimension H:6.378 in; Seal Type:Kevlar Packing Seal; Dimension M:7.0 in; Bearing UPC:013992028167; Weight:174 lb; Bearing - Housing - Seal UPC:013992073846; Dimension L:20.0 in; Housing Width:6.1 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Note:This product line wa; Ca - |
| 6HR2042TM[F(AP-C),F(AP-CF),F(AP-HC)]+[112-1000/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR | Bi:20,96 mm; D:47 mm; B:20,96 mm; d:20,24 mm; Size (mm):20.24x47x20.96; C:14 mm; A:17,65 mm; Outer Diameter (mm):47; Bearing number:204KRR2; Be:14 mm; Width (mm):20,96; Bore Diameter (mm):20,24; |
| 6HR2555[F(AP-C),F(AP-CF),F(AP-HC)]+[122-2600/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Shaft Tolerance:0.0015 in; Dimension M:2.13 in; Oil Lubrication - B/C/O Seal:1500 rpm; C - Dynamic Load (Basic):46400 lb; Dimension L Exp:3.56 in; e - Geometry Factor:0.24; Oil Lubrication - M/N Seal:1800 rpm; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:1800 rpm; Pre Install Cle |
| 6HR2042TM[F(AP-C),F(AP-CF),F(AP-HC)]+[112-1000/1]L[H,P,SP,UP]M THK Separated Linear Guide Side Rails Set Model HR | D:170 mm; Width (mm):51; d2:108 mm; Calculation factor (e):0,24; r1 min.:2,1 mm; ra max.:2 mm; Calculation factor (Y0):2,8; C:51 mm; b:8,3 mm; Bore Diameter (mm):95; Basic dynamic load rating (C):380 kN; r2 min.:2,1 mm; Basic static load rating (C0):450 kN; Outer Diameter (mm):170; Fatigue load limi |
| 6HR2042TM[F(AP-C),F(AP-CF),F(AP-HC)]+[112-1000/1]L[F(AP-C),F(AP-CF),F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR | Angle (α):40 °; Outer Diameter (mm):150; Basic static load rating (C0):63,6 kN; D:150 mm; d:100 mm; Basic dynamic load rating (C):61,2 kN; C:24 mm; Width (mm):24; Bore Diameter (mm):100; B:24 mm; Weight:1,72 Kg; Size (mm):100x150x24; (Grease) Lubrication Speed:3500 r/min; a:64,4 mm; Bearin |