5HR2555T[F(AP-C),F(AP-CF),F(AP-HC)]+[148-2600/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
Product Details
| Series |
2500 |
| Cone Part Number |
2582 |
| Cup Part Number |
2524YD |
| Design Units |
Imperial |
| Bearing Weight |
2.5 lb |
| Cage Type |
Stamped Steel |
| Ab - Cage-Cone Frontface Clearance |
0.06 in |
| d |
1.2500 in |
| D |
2.7500 in |
| B - Cone Width |
0.9983 in |
| C - Double Cup Width |
2.2500 in |
| T - Bearing Width across Cones |
2.6250 in |
| R - Cone Backface To Clear Radius1 |
0.14 in |
| r - Cup Frontface To Clear Radius2 |
0.03 in |
| db - Cone Backface Backing Diameter |
1.73 in |
| Da - Cup Frontface Backing Diameter |
2.56 in |
| Aa - Cage-Cone Backface Clearance |
0.02 in |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 |
4880 lbf |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 |
32800 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 |
8500 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
2280 lbf |
| K - Factor7 |
2.14 |
| e - ISO Factor8 |
0.27 |
| Y1 - ISO Factor9 |
2.47 |
| Y2 - ISO Factor10 |
3.67 |
| G1 - Heat Generation Factor (Roller-Raceway)11 |
23.6 |
| G2 - Heat Generation Factor (Rib-Roller End) |
9.63 |
| Cg - Geometry Factor12 |
0.0656 |