7HR918+[46-300/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
| Brand Name: |
THK |
| Model Number: |
7HR918+[46-300/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] |
| Series: |
835 |
| Cone Part Number: |
835 |
| Cup Part Number: |
832-B |
| Design Units: |
Imperial |
| Bearing Weight: |
13.8 lb |
| Cage Type: |
Stamped Steel |
| d: |
2.7500 in |
| D: |
6.6250 in |
| PDF |
7HR918+[46-300/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] |
Product Details
| Series |
835 |
| Cone Part Number |
835 |
| Cup Part Number |
832-B |
| Design Units |
Imperial |
| Bearing Weight |
13.8 lb |
| Cage Type |
Stamped Steel |
| d |
2.7500 in |
| D |
6.6250 in |
| D1 - Flange Outer Diameter |
6.9960 in |
| B - Cone Width |
2.2190 in |
| C - Cup Width |
1.6250 in |
| C1 - Cup Flange Width |
0.3750 in |
| T1 - Bearing Width |
2.1250 in |
| T - Bearing Width to Flange |
0.8750 in |
| R - Cone Backface To Clear Radius1 |
0.14 in |
| r - Cup Backface To Clear Radius2 |
0.130 in |
| da - Cone Frontface Backing Diameter |
3.31 in |
| db - Cone Backface Backing Diameter |
3.58 in |
| Da - Cup Frontface Backing Diameter |
6.14 in |
| Ab - Cage-Cone Frontface Clearance |
0.1 in |
| Aa - Cage-Cone Backface Clearance |
0.13 in |
| a - Effective Center Location3 |
-0.73 in |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
28300 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
109000 lbf |
| C0 - Static Radial Rating |
117000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
14500 lbf |
| K - Factor7 |
1.95 |
| e - ISO Factor8 |
0.3 |
| Y - ISO Factor9 |
2 |
| G1 - Heat Generation Factor (Roller-Raceway)10 |
198 |
| G2 - Heat Generation Factor (Rib-Roller End) |
34.8 |
| Cg - Geometry Factor11 |
0.0937 |